Mge-ups-systems AmpMeter PDU User Manual

www.mgeups.com AmpMeter PDU THEUNINTERRUPTIBLEPOWERPROVIDERInstallation and user manual

3. Operations This chapter contains information on commands and abilities available only in models equipped for remote monitoring. Interfaces The Am

3. Operations HTML Interface The HTML interface is constructed of three major components: the System Location bar, the User/Navigation bar and the

3. Operations Environmental Monitoring The Environmental Monitoring section offers access to the Input Load page. This section is available to admi

3. Operations Network The Network configuration page is used for maintenance of the network interface. From this page an administrator may configu

3. Operations Setting the HTTP authentication method: The AmpMeter PDU HTTP server supports two authentication methods for security and validation o

3. Operations Removing a user: Click on the Remove link in the Action column for the user to be removed and press Yes on the subsequent confirmatio

3. Operations Testing the FTP upload configuration: This test validates that the unit is able to contact and log onto the specified FTP server, down

3. Operations Tools The Tools section contains access to rebooting the unit, uploading new firmware as well as resetting the unit to factory defaul

3. Operations Command Line Interface Logging In Logging in through Telnet requires directing the Telnet client to the configured IP address of the u

3. Operations Administrative Command Summary (continued) Set FTP Filename Specifies the file to be uploaded via FTP Set FTP Filepath Specifies th

Instructions This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literatu

3. Operations Operations Commands Operations commands provide information about the AmpMeter PDU environment and control session operations. Display

3. Operations Displaying the status of the Environmental Monitor The Envmon command displays the status of the integrated Environmental Monitor. By

3. Operations Administration Commands Administration commands may only be issued by a user with administrative privileges, such as the predefined MG

3. Operations Changing a password The Set User Password command changes a user’s password. For security, when you type a password, the characters

3. Operations Granting and removing input status viewing privileges The Set User Envmon command grants or removes input status viewing privileges t

3. Operations Displaying user serial port access The List User command displays all ports for a user. To display user serial port access: At the

3. Operations Displaying serial port information The Show Ports command displays information about all serial ports. This information includes: •

3. Operations Displaying system configuration information The Show System command displays all system configuration information. • Firmware versio

3. Operations Creating a descriptive infeed name The Set Infeed Name command assigns a descriptive name to an infeed. This descriptive name is disp

3. Operations Setting the subnet mask The Set Subnet command sets the subnet mask for the network the PT40 will be attached to. To set the subnet m

Contents GETTING STARTED 4 Quick Start Guide ...

3. Operations HTTP Administration NOTE: A restart is required after setting or changing ANY Telnet/Web configurations. See Performing a warm boot

3. Operations FTP Administration You may upload new versions of firmware into the AmpMeter PDU using File Transfer Protocol (FTP). This allows acc

3. Operations Displaying FTP configuration information The Show FTP command displays all FTP configuration information. • FTP Host IP address • F

4. Advanced Operations SSL 34 Enabling and Setting up SSL Support 34 SSL Technical Specifications 34 SSH 35 Enabling and Setting up SSH Suppor

4. Advanced Operations This chapter contains information on commands and abilities available only in models equipped for remote monitoring. SSL Secu

4. Advanced Operations SSH Secure Shell (SSH) version 2 enables secure network terminal sessions between a AmpMeter PDU Remote Power Manager and a

4. Advanced Operations SNMP The AmpMeter PDU family of products supports the Simple Network Management Protocol (SNMP). This allows network managem

4. Advanced Operations Setting the trap timer The Set Traptime command sets the timer period between repeated error-condition traps. The valid ran

4. Advanced Operations Displaying SNMP configuration information The Show SNMP command displays all SNMP configuration information. • SNMP support

4. Advanced Operations Environmental Monitor Status traps Status Error Description Normal The Environmental Monitor is working correctly NoComm

1. Getting Started Quick Start Guide The following instructions will help you quickly install and configure your AmpMeter PDU for use on your networ

4. Advanced Operations Temp Trap The Temp trap is generated whenever the temperature on a temperature/humidity sensor is beyond preset thresholds.

4. Advanced Operations Configuring Traps SNMP Trap Command Summary Command Description Set Trap EM Status Enables or disables the Environmental M

4. Advanced Operations Enabling or Disabling a Load trap The Set Trap Infeed Load command is used to enable or disable an Infeed Load trap. To Enabl

4. Advanced Operations Setting the Temperature sensor threshold limits The Set Trap THS Templow and Set Trap THS Temphigh commands are used to set

4. Advanced Operations Displaying trap configuration information The Show Traps command displays information about all traps. To display trap inform

5. Appendices RESETTING TO FACTORY DEFAULTS 46 To reset to factory defaults from the HTML interface...

5. Appendices Resetting to Factory Defaults You may reset the non-volatile RAM that stores all configurable options. This clears all administrator-

5. Appendices Technical Specifications Models Europe/Asia Model Voltage Inlet Cordset and Plug (10’) Outlets RA12-2-C20 230V, 60Hz IEC 60320/C

5. Appendices Americas ModelVo ltage C urrent Vo ltage O utlet Branch C ircuitPhase2TotalM o d ele Tensio n Co urrant Tensio n Prise C ircuit d e l

5. Appendices 301-0399-3 Rev B. - Page 49 Data Connections RS-232 port The AmpMeter PDU may be equipped standard with an RJ45 DTE RS-232c serial por

2. Installation Before installation, refer to the following lists to ensure that you have all the items shipped with the unit as well as all other

2. Installation Safety Precautions This section contains important safety and regulatory information that should be reviewed before installation and

2. Installation Mounting Figure 3. Mounting Horizontal/Rack Select the appropriate bracket mounting points for proper mounting depth within the ra

2. Installation Connecting Devices To avoid the possibility of noise due to arcing: 1. Keep the device’s on/off switch in the off position until af

3. Operations INTERFACES 10 Usernames and Passwords 10 HTML INTERFACE 11 Logging In 11 Environmental Monitoring 12 Input Load ......