MGE UPS Systems Galaxy 3000 Specifications download pdf

MGE UPS SYSTEMS - Galaxy 3000 Specification 1 Effective: September, 2006

MGE UPS SYSTEMS

GALAXY 3000 10-30 kVA UPS

Data Center Grade Three Phase Uninterruptible Power Supply

Guide Specifications

1.0 GENERAL

1.1 SUMMARY

This specification describes a three-phase, on-line, double conversion, solid state Uninterruptible Power

System, hereafter referred to as the UPS. The UPS shall operate in conjunction with the existing building

electrical system to provide high quality power conditioning, back-up power protection and distribution for

electronic equipment loads. The system shall consist of a solid state inverter, power factor corrected rectifier,

a 100% rated for continuous duty static switch, an internal maintenance bypass switch, battery plant, graphical

status/control panel, and synchronizing circuitry as described herein.

1.2 STANDARDS

The UPS shall meet the requirements of the following standards:

A. UL listed under 1778, standards for uninterruptible power supply equipment

B. UL Canada (cUL)

C. FCC rules and regulations of part 15, subpart j, class A

D. IEC 1000 (801) level 4

E. The UPS shall be designed in accordance with the applicable sections of the documents published by:

» National Fire Protection Association (NFPA)/National Electric Code (NEC)

» National Electrical Manufacturer’s Association (NEMA)

» Occupational Safety & Health Administration (OSHA)

1.3 SUBMITTALS

Submittals shall contain the following documentation:

A. Installation Package: Complete electrical characteristics and connection requirements. Provide detailed

equipment outlines with cabinet dimensions and spacing requirements; location of conduit entry/exit

paths; location of floor/seismic mounting; available battery types/sizes; all cabinet weights; heat rejection

and air flow requirements; single-line diagram; control, and external wiring.

B. Product Data: Provide catalog sheets and technical data sheets to indicate physical data and electrical

performance, electrical characteristics, and connection requirements.

C. Manufacturer’s Installation Instructions: Indicate application conditions and limitations of use stipulated

by Product testing agency. Include instructions for storage, handling, protection, examination,

preparation, installation, and starting of Product. Include equipment installation outline, connection

diagram for external cabling, internal wiring diagram, and written instruction for installation.

1.4 FINAL SUBMITTALS

Upon delivery of the UPS system, the following submittals shall be included:

A. A complete set of installation drawings showing all the information stated in section 1.3.

B. An installation and users manual showing safe and correct operation of all UPS functions.

1 2 3 4 5 6 ... 14 15

Summary of Contents

Page 1 - Guide Specifications

MGE UPS SYSTEMS - Galaxy 3000 Specification 1 Effective: September, 2006 MGE UPS SYSTEMS GALAXY 3000 10-30 kVA UPS Data Center Grad

Page 2 - 1.8 WARRANTY

MGE UPS SYSTEMS - Galaxy 3000 Specification 10 Effective: September, 2006 provided. The systems shall use standard analog telephon

Page 3 - 2.2 SYSTEM DESCRIPTION

MGE UPS SYSTEMS - Galaxy 3000 Specification 11 Effective: September, 2006 § load powered by UPS 6. MultiSlot Communications Card

Page 4

MGE UPS SYSTEMS - Galaxy 3000 Specification 12 Effective: September, 2006 » Alarm Test/Reset push-button: (white LED) to reset th

Page 5 - 2.4 COMPONENT DESCRIPTION

MGE UPS SYSTEMS - Galaxy 3000 Specification 13 Effective: September, 2006 END OF SECTION

Page 6

MGE UPS SYSTEMS - Galaxy 3000 Specification 14 Effective: September, 2006 SPECIFICATION KEY 2.2 A –1 OUTPUT POWER RATINGS § 10

Page 7

MGE UPS SYSTEMS - Galaxy 3000 Specification 15 Effective: September, 2006 2.2 D-2 BATTERY CURRENT 10kVA 15kVA 20kVA 30kVA

Page 8

MGE UPS SYSTEMS - Galaxy 3000 Specification 2 Effective: September, 2006 1.5 QUALIFICATIONS & QUALITY ASSURANCE A. Manufactu

Page 9 - 4.0 ACCESSORIES

MGE UPS SYSTEMS - Galaxy 3000 Specification 3 Effective: September, 2006 1.9 SERVICE AND SPARE PARTS The manufacturer shall, upon

Page 10

MGE UPS SYSTEMS - Galaxy 3000 Specification 4 Effective: September, 2006 B. AC Input Characteristics 1. Voltage: 208, 220, 480

Page 11 - § load powered by UPS

MGE UPS SYSTEMS - Galaxy 3000 Specification 5 Effective: September, 2006 2.3 MODES OF OPERATION The UPS module shall be designed

Page 12 - 5.3 MAINTENANCE TRAINING

MGE UPS SYSTEMS - Galaxy 3000 Specification 6 Effective: September, 2006 7. Temperature Compensated Charging: The battery charger

Page 13 - END OF SECTION

MGE UPS SYSTEMS - Galaxy 3000 Specification 7 Effective: September, 2006 plug-in power assembly shall be monitored. Diagnostics sh

Page 14 - SPECIFICATION KEY

MGE UPS SYSTEMS - Galaxy 3000 Specification 8 Effective: September, 2006 § Bypass source outside tolerances § Battery temperature

Page 15 - 2.2 D-2 BATTERY CURRENT

MGE UPS SYSTEMS - Galaxy 3000 Specification 9 Effective: September, 2006 3.1 MECHANICAL DESIGN AND VENTILATION A. Enclosure: Th

MGE UPS Systems Galaxy 3000 Specifications

Browse online or download Specifications for Power supply units MGE UPS Systems Galaxy 3000. MGE UPS Systems Galaxy 3000 Specifications User Manual

Summary of Contents

More documents for Power supply units MGE UPS Systems Galaxy 3000

Comments to this Manuals

MGE UPS Systems Galaxy 3000 Specifications

Browse online or download Specifications for Power supply units MGE UPS Systems Galaxy 3000. MGE UPS Systems Galaxy 3000 Specifications User Manual

Summary of Contents

More documents for Power supply units MGE UPS Systems Galaxy 3000

Comments to this Manuals

Related products and manuals for Power supply units MGE UPS Systems Galaxy 3000